K Pro HP Grout

Product Overview

Kaufman K Pro HP Grout is a grout product built for anchoring, baseplate support, equipment setting, and void-filling work where stable load transfer matters. It is intended for contractors that need consistent placement and reliable support under demanding jobsite conditions.

Best For

• Precision equipment grouting
• Dynamic load and vibration applications
• Chemical tank and vessel support
• Baseplates and equipment pads
• Anchor bolt pockets and void filling
• Column base and machinery support

Key Features

• Packaging: 3-gal and 15-gal epoxy units; 40-lb aggregate bags; .3 ft³ kit per Kaufman source page
• Yield: Flowable: 1.2 ft³ with 3 bags aggregate; stiff: 1.6 ft³ with 4.5 bags aggregate per source page
• Mix: 2:1 by volume for epoxy system; aggregate loading varies by high-flow vs standard mix
• ASTM: ASTM C-881 Types I, II, IV & V Grade 1 Class C
• AASHTO: AASHTO M-235 Types I, II, IV & V Grade 1 Class C
• Supports load transfer and grout placement around structural or equipment components

Material & Application Notes

Mixing guidance: 2:1 by volume for epoxy system; aggregate loading varies by high-flow vs standard mix. Use over prepared concrete, steel, dowels, threaded rod, base plates, machinery foundations where approved.

Why This Product

This product is for work where support and bearing matter. It helps contractors set equipment, fill voids, and transfer load with more confidence than improvised jobsite mixes.