BRING THE JOB.
Material, dimensions, access and the result you need. Start with the work—not a part number.
GERMAN ENGINEERING. HAUS HUSTLE.
KEMROC drum cutters & excavator attachmentsTHE HARD STUFF.
HANDLED.
Rock. Concrete. The job nobody wants. Explore KEMROC cutting power with the Supply Haus Contractor Concierge.
CUTTING ACTION / SOUND OFF
Video unavailable. Explore the equipment below.
KEMROC KR · CONCRETE REMOVALPRECISION WITH AN EDGE.
14EQUIPMENT FAMILIES
131MODEL ENTRIES
HAUSCONTRACTOR CONCIERGE
KEMROC IN ACTION / AT THE HAUS
HARD WORK.
HIT PLAY.
A quick look at KEMROC in action. Explore more on their YouTube channel, then bring your job to the Haus.
Watch KEMROC on YouTubeOpens YouTube in a new tabHave a job in mind?
@kemroc / YouTube12-SECOND PREVIEW / SOUND OFF
Preview unavailable. Watch KEMROC on YouTube.
EXPLORE THE KEMROC CHANNEL01 / THE LINEUP
MEET THE HEAVY HITTERS.
From narrow trenches to controlled concrete removal—start with an equipment family.
CHOOSE THE RIGHT CUT
KEMROC equipment guide
Start with the material and the result you need. Explore these attachment families, compare manufacturer specifications, and ask Supply Haus to review your job before selecting a configuration.
EK — Chain cutters
Chain cutters for exploring narrow trenching applications in rock and other suitable materials. Compare cutting width and carrier requirements for the job.
Models in this family: EK 20, EK 40, EK 60, EK 100, EK 110, EK 140, EK 150, EK 160, EK 220
EKT — Convertible drum cutters
Convertible drum cutters for applications that may require different cutting configurations. Review the available configuration and hydraulic requirements with the team.
Models in this family: EKT 20, EKT 40, EKT 60, EKT 100, EKT 110, EKT 140, EKT 150, EKT 160, EKT 220
KR — Spur-gear drum cutters
Spur-gear rotary drum cutters for exploring rock excavation, concrete removal and surface profiling. Compare dimensions, cutting force and carrier specifications.
Models in this family: KR 10, KR 15, KR 18, KR 20, KR 35, KR 35C, KR 45, KR 50, KR 65, KR 70, KR 80, KR 110, KR 110 C, KR 120, KR 120 C, KR 150, KR 150 C, KR 155, KR 165, KR 165C, KR 175, KR 175C, KR 200, KR 250, KR 400, KR 400C, KR 450, KR 450C
KRD — Direct-drive drum cutters
Direct-drive drum cutters for controlled material removal. Review the model specifications against the carrier and intended cutting application.
Models in this family: KRD 15, KRD 18, KRD 30, KRD 45, KRD 70, KRD 100, KRD 120, KRD 150, KRD 155, KRD 165, KRD 175
KRC — Bullhead cutters
Bullhead cutters for exploring trenching and excavation work. Compare cutting geometry and hydraulic requirements before choosing a model.
Models in this family: KRC 40, KRC 60, KRC 100, KRC 110, KRC 140, KRC 150, KRC 160, KRC 220, KRC 240
DMW — Cutter wheels
Cutter wheels for exploring slot cutting and trenching applications. Cutting depth, width and material determine the technical review.
Models in this family: DMW 90 Wheel 400, DMW 90 Wheel 600, DMW 130 Wheel 400, DMW 130 Wheel 600, DMW 130 Wheel 800, DMW 220 Wheel 600, DMW 220 Wheel 800, DMW 220 Wheel 1000, DMW 240 Wheel 600, DMW 240 Wheel 800, DMW 240 Wheel 1000, DMW 400 Wheel 1000
KRX — Powertool drives
Powertool drives for compatible attachment configurations. Confirm the required tool, carrier and hydraulic setup.
Models in this family: KRX 30, KRX 45, KRX 65, KRX 68, KRX 70, KRX 110, KRX 120, KRX 130, KRX 140, KRX 150, KRX 240
EX — Patch planers
Patch planers for surface removal and profiling applications. Discuss the material, removal depth and finish required.
Models in this family: EX 20, EX 20 HD, EX 30 HD, EX 45 HD, EX 60 HD, EX 70 HD
ES — Cutter heads
Cutter heads for suitable excavation and profiling work. Check dimensions and hydraulic requirements for the intended setup.
Models in this family: ES 20, ES 20 HD, ES 30 HD, ES 45 HD, ES 60 HD, ES 70 HD, ES 80 HD, ES 90 HD, ES 110 HD, ES 120 HD
KSI — Soil mixing attachments
Soil mixing attachments for specialist ground-improvement applications. Discuss soil conditions, treatment depth and the project specification.
Models in this family: KSI 7000, KSI 12000, KSI 16000
EBA — Auger drives
Auger drive attachments for drilling applications. Review tool configuration, ground conditions and carrier compatibility.
Models in this family: EBA 500, EBA 750, EBA 1000, EBA 1500, EBA 2300, EBA 2800, EBA 3300
KTR — Trenching attachments
Trenching attachments for dedicated trench-cutting work. Bring the required trench dimensions and material information.
Models in this family: KTR 65, KTR 120, KTR 130
KDS — Diamond saws
Diamond saw attachments for suitable cutting applications. Review the material, reinforcement and required cutting depth.
Models in this family: KDS 20, KDS 30, KDS 40, KDS 50, KDS 50 HD
KRM — Rotation units
Rotation units for compatible KEMROC attachment combinations. Confirm the exact attachment and carrier interface before selection.
Models in this family: KRM 20, KRM 30, KRM 35, KRM 40, KRM 50, KRM 60, KRM 70, KRM 80
What to bring to an equipment review
Share your carrier make and model, operating weight, available hydraulic flow and pressure, material, required cutting dimensions, job location and timing. For concrete, include thickness and reinforcement; for rock, include known strength or geology. Final compatibility, pricing and availability require confirmation.
02 / START WITH THE WORK
WHAT ARE WE
GETTING INTO?
You know the challenge. Let’s narrow the conversation. These are starting points for exploration, not final equipment recommendations.
LESS GUESSWORK.
MORE JOB DETAIL.
Tell us the material, trench width, depth and length. Then bring the carrier and hydraulic information into the conversation.
FAMILIES TO EXPLORE
03 / THE FULL CATALOG
PICK YOUR POWER.
Explore the lineup. Compare the specs. Build a better first conversation.
Weight filtering uses manufacturer metric ranges. Hydraulic, mounting and application checks are still required. Select up to 3 models
Manufacturer listings checked October 28, 2026. Published values are reference data, not a compatibility guarantee. Pricing, configuration and U.S. availability require confirmation.
Source notes & full specification index
Explore 131 KEMROC model entries across 14 equipment families. Request pricing, configuration and availability from Supply Haus.
· Download the U.S. product brochure
Specifications below are manufacturer-published metric reference values checked October 28, 2026. Technical review is required for carrier, hydraulic and application compatibility. U.S. availability is subject to confirmation.
EK — Chain cutters
EK 20
KEMROC EK 20 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutter drum diameter (C) | 325 mm |
| Cutting force at 380 bar | 15 kN |
| Cutting width (B) | 390 mm |
| Drum cutter length (A) | 1000 mm |
| Max. oil flow | 70 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 25 MPa |
| Max. torque at 380 bar | 2400 Nm |
| Number of picks in cutter drums | 56 Pcs |
| Number of picks in the cutter chain | 54 Pcs |
| Pick box | PH 14 Type |
| Rated power | 22 kW |
| Recommended excavator weight | 2 – 6 t |
| Recommended oil flow | 30 l/min |
| Recommended rpm | 75 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 15/29/26/14 C |
| Weight | 315 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EK 40
KEMROC EK 40 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM35 |
| Cutter drum diameter (C) | 475 mm |
| Cutting force at 380 bar | 24 kN |
| Cutting width (B) | 500 mm |
| Drum cutter length (A) | 1300 mm |
| Max. oil flow | 115 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 30 MPa |
| Number of picks in cutter drums | 52 Pcs |
| Number of picks in the cutter chain | 49 Pcs |
| Pick box | PH 20 Type |
| Rated power | 44 kW |
| Recommended excavator weight | 5 – 11 t |
| Recommended oil flow | 85 l/min |
| Recommended rpm | 90 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/46/38/20 C |
| Torque at 380 bar | 5700 Nm |
| Weight | 750 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EK 60
KEMROC EK 60 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM40 |
| Cutter drum diameter (C) | 600 mm |
| Cutting force at 380 bar | 36 kN |
| Cutting width (B) | 500 | 600 mm |
| Drum cutter length (A) | 1600 mm |
| Max. oil flow | 195 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Number of picks in cutter drums | 40 | 60 Pcs |
| Number of picks in the cutter chain | 53 Pcs |
| Pick box | PH 22 Type |
| Rated power | 60 kW |
| Recommended excavator weight | 10 – 17 t |
| Recommended oil flow | 140 l/min |
| Recommended rpm | 80 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 15/46/38/22 C |
| Torque at 380 bar | 10900 Nm |
| Weight | 1250 | 1300 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EK 100
KEMROC EK 100 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutter drum diameter (C) | 800 mm |
| Cutting force at 380 bar | 47 kN |
| Cutting width (B) | 600 | 700 | 800 mm |
| Drum cutter length (A) | 1970 mm |
| Max. oil flow | 260 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 80 MPa |
| Number of picks in cutter drums | 28 | 40 | 48 Pcs |
| Number of picks in the cutter chain | 54 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 100 kW |
| Recommended excavator weight | 18 – 30 t |
| Recommended oil flow | 200 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 18900 Nm |
| Weight | 2450 | 2510 | 2620 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EK 110
KEMROC EK 110 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 800 mm |
| Cutting force at 380 bar | 61 kN |
| Cutting width (B) | 600 | 700 | 800 mm |
| Drum cutter length (A) | 1970 mm |
| Max. oil flow | 300 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 80 MPa |
| Number of picks in cutter drums | 28 | 40 | 48 Pcs |
| Number of picks in the cutter chain | 54 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 110 kW |
| Recommended excavator weight | 25 – 32 t |
| Recommended oil flow | 250 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 24500 Nm |
| Weight | 2450 | 2510 | 2620 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EK 140
KEMROC EK 140 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 850 mm |
| Cutting force at 380 bar | 60 kN |
| Cutting width (B) | 800 | 900 | 1000 mm |
| Drum cutter length (A) | 2150 mm |
| Max. oil flow | 320 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks in cutter drums | 44 | 48 | 56 Pcs |
| Number of picks in the cutter chain | 63 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 140 kW |
| Recommended excavator weight | 30 – 45 t |
| Recommended oil flow | 275 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 25400 Nm |
| Weight | 3650 | 3700 | 3800 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EK 150
KEMROC EK 150 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 850 mm |
| Cutting force at 380 bar | 71 kN |
| Cutting width (B) | 800 | 900 | 1000 mm |
| Drum cutter length (A) | 2150 mm |
| Max. oil flow | 390 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks in cutter drums | 44 | 48 | 56 Pcs |
| Number of picks in the cutter chain | 63 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 150 kW |
| Recommended excavator weight | 35 – 50 t |
| Recommended oil flow | 330 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 30300 Nm |
| Weight | 3650 | 3700 | 3800 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EK 160
KEMROC EK 160 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM70 |
| Cutter drum diameter (C) | 850 mm |
| Cutting force at 380 bar | 80 kN |
| Cutting width (B) | 800 | 900 | 1000 mm |
| Drum cutter length (A) | 2150 mm |
| Max. oil flow | 425 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 120 MPa |
| Number of picks in cutter drums | 44 | 48 | 56 Pcs |
| Number of picks in the cutter chain | 63 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 150 kW |
| Recommended excavator weight | 35 – 50 t |
| Recommended oil flow | 350 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 34000 Nm |
| Weight | 3650 | 3700 | 3800 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EK 220
KEMROC EK 220 — Chain cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter drum diameter (C) | 990 mm |
| Cutting force at 380 bar | 147 kN |
| Cutting width (B) | 920 mm |
| Drum cutter length (A) | 2400 mm |
| Max. oil flow | 650 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 140 MPa |
| Number of picks in cutter drums | 44 Pcs |
| Number of picks in the cutter chain | 58 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 50 – 70 t |
| Recommended oil flow | 550 l/min |
| Recommended rpm | 45 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 72700 Nm |
| Weight | 5900 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT — Convertible drum cutters
EKT 20
KEMROC EKT 20 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutter drum diameter (C) | 225 mm |
| Cutting force at 380 bar | 21 kN |
| Cutting width (B) | 410 mm |
| Drum cutter length (A) | 540 mm |
| Max. oil flow | 70 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 25 MPa |
| Number of picks | 56 Pcs |
| Pick box | PH 14 Type |
| Rated power | 22 kW |
| Recommended excavator weight | 2 – 6 t |
| Recommended oil flow | 30 l/min |
| Recommended rpm | 75 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 15/29/26/14 C |
| Torque at 380 bar | 2400 Nm |
| Weight per cutting width | 130 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT 40
KEMROC EKT 40 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM35 |
| Cutter drum diameter (C) | 445 mm |
| Cutting force at 380 bar | 26 kN |
| Cutting width (B) | 500 mm |
| Drum cutter length (A) | 1000 mm |
| Max. oil flow | 115 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 30 MPa |
| Number of picks | 52 Pcs |
| Pick box | PH 20 Type |
| Rated power | 44 kW |
| Recommended excavator weight | 7 – 11 t |
| Recommended oil flow | 85 l/min |
| Recommended rpm | 90 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/46/38/20 C |
| Torque at 380 bar | 5700 Nm |
| Weight per cutting width | 430 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT 60
KEMROC EKT 60 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM40 |
| Cutter drum diameter (C) | 590 mm |
| Cutting force at 380 bar | 37 kN |
| Cutting width (B) | 500 | 600 mm |
| Drum cutter length (A) | 1190 mm |
| Max. oil flow | 195 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Number of picks | 40 / 60 Pcs |
| Pick box | PH 22 Type |
| Rated power | 60 kW |
| Recommended excavator weight | 12 – 17 t |
| Recommended oil flow | 140 l/min |
| Recommended rpm | 80 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 15/46/38/22 C |
| Torque at 380 bar | 10900 Nm |
| Weight per cutting width | 725 | 775 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT 100
KEMROC EKT 100 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutter drum diameter (C) | 690 mm |
| Cutting force at 380 bar | 55 kN |
| Cutting width (B) | 700 | 800 mm |
| Drum cutter length (A) | 1460 mm |
| Max. oil flow | 260 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 80 MPa |
| Number of picks | 40 / 44 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 100 kW |
| Recommended excavator weight | 18 – 30 t |
| Recommended oil flow | 200 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 18900 Nm |
| Weight per cutting width | 1300 | 1360 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT 110
KEMROC EKT 110 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 690 mm |
| Cutting force at 380 bar | 71 kN |
| Cutting width (B) | 700 | 800 mm |
| Drum cutter length (A) | 1460 mm |
| Max. oil flow | 300 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 80 MPa |
| Number of picks | 40 / 44 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 110 kW |
| Recommended excavator weight | 25 – 32 t |
| Recommended oil flow | 250 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 24500 Nm |
| Weight per cutting width | 1300 | 1360 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT 140
KEMROC EKT 140 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 71 kN |
| Cutting width (B) | 880 mm |
| Drum cutter length (A) | 1540 mm |
| Max. oil flow | 320 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 140 kW |
| Recommended excavator weight | 30 – 45 t |
| Recommended oil flow | 275 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 25400 Nm |
| Weight per cutting width | 2000 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT 150
KEMROC EKT 150 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 84 kN |
| Cutting width (B) | 880 mm |
| Drum cutter length (A) | 1540 mm |
| Max. oil flow | 390 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 150 kW |
| Recommended excavator weight | 35 – 50 t |
| Recommended oil flow | 330 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 30300 Nm |
| Weight per cutting width | 2000 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT 160
KEMROC EKT 160 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM70 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 94 kN |
| Cutting width (B) | 880 | 1040 mm |
| Drum cutter length (A) | 1540 mm |
| Max. oil flow | 425 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 120 MPa |
| Number of picks | 44 / 56 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 150 kW |
| Recommended excavator weight | 35 – 50 t |
| Recommended oil flow | 350 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 34000 Nm |
| Weight per cutting width | 2000 | 2500 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EKT 220
KEMROC EKT 220 — Convertible drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter drum diameter (C) | 860 mm |
| Cutting force at 380 bar | 169 kN |
| Cutting width (B) | 920 | 1300 mm |
| Drum cutter length (A) | 1760 mm |
| Max. oil flow | 650 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 140 MPa |
| Number of picks | 44 / 60 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 50 – 70 t |
| Recommended oil flow | 550 l/min |
| Recommended rpm | 45 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 72700 Nm |
| Weight per cutting width | 3100 | 3550 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR — Spur-gear drum cutters
KR 10
KEMROC KR 10 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutter drum diameter (C) | 225 mm |
| Cutting force at 380 bar | 8.3 kN |
| Cutting width (B) | 425 mm |
| Drum cutter length (A) | 490 mm |
| Max. oil flow | 40 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 20 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 14 Type |
| Rated power | 10 kW |
| Recommended excavator weight | 0,6 – 3 t |
| Recommended oil flow | 15 l/min |
| Recommended rpm | 95 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 15/29/26/14 C |
| Torque at 380 bar | 900 Nm |
| Weight per cutting width | 103 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 15
KEMROC KR 15 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutter drum diameter (C) | 225 mm |
| Cutting force at 380 bar | 9.2 kN |
| Cutting width (B) | 425 mm |
| Drum cutter length (A) | 490 mm |
| Max. oil flow | 45 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 20 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 14 Type |
| Rated power | 15 kW |
| Recommended excavator weight | 0,6 – 3 t |
| Recommended oil flow | 20 l/min |
| Recommended rpm | 115 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 15/29/26/14 C |
| Torque at 380 bar | 1000 Nm |
| Weight per cutting width | 103 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 18
KEMROC KR 18 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutter drum diameter (C) | 225 mm |
| Cutting force at 380 bar | 18.8 kN |
| Cutting width (B) | 425 mm |
| Drum cutter length (A) | 490 mm |
| Max. oil flow | 90 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 20 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 14 Type |
| Rated power | 18 kW |
| Recommended excavator weight | 2 – 4 t |
| Recommended oil flow | 40 l/min |
| Recommended rpm | 115 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 15/29/26/14 C |
| Torque at 380 bar | 2100 Nm |
| Weight per cutting width | 103 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 20
KEMROC KR 20 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutter drum diameter (C) | 240 mm |
| Cutting force at 380 bar | 17.6 kN |
| Cutting width (B) | 495 mm |
| Drum cutter length (A) | 500 mm |
| Max. oil flow | 85 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 20 MPa |
| Number of picks | 56 Pcs |
| Pick box | PH 14 Type |
| Rated power | 18 kW |
| Recommended excavator weight | 2 – 4 t |
| Recommended oil flow | 35 l/min |
| Recommended rpm | 100 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 15/29/26/14 C |
| Torque at 380 bar | 2100 Nm |
| Weight per cutting width | 130 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 35
KEMROC KR 35 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM35 |
| Cutter drum diameter (C) | 370 mm |
| Cutting force at 380 bar | 23.9 kN |
| Cutting width (B) | 620 mm |
| Drum cutter length (A) | 845 mm |
| Max. oil flow | 115 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 30 MPa |
| Number of picks | 64 Pcs |
| Pick box | PH 20 Type |
| Rated power | 30 kW |
| Recommended excavator weight | 5 – 8 t |
| Recommended oil flow | 85 l/min |
| Recommended rpm | 115 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/46/38/20 C |
| Torque at 380 bar | 4400 Nm |
| Weight per cutting width | 375 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 35C
KEMROC KR 35C — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM35 |
| Cutter drum diameter (C) | 370 mm |
| Cutting force at 380 bar | 23.9 kN |
| Cutting width (B) | 520 mm |
| Drum cutter length (A) | 845 mm |
| Max. oil flow | 115 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 30 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 20 Type |
| Rated power | 30 kW |
| Recommended excavator weight | 5 – 8 t |
| Recommended oil flow | 85 l/min |
| Recommended rpm | 115 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/46/38/20 C |
| Torque at 380 bar | 4400 Nm |
| Weight per cutting width | 310 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 45
KEMROC KR 45 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM40 |
| Cutter drum diameter (C) | 400 mm |
| Cutting force at 380 bar | 30.7 kN |
| Cutting width (B) | 600 mm |
| Drum cutter length (A) | 990 mm |
| Max. oil flow | 145 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 40 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 20 Type |
| Rated power | 45 kW |
| Recommended excavator weight | 9 – 15 t |
| Recommended oil flow | 105 l/min |
| Recommended rpm | 105 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 16/46/38/20 C |
| Torque at 380 bar | 6100 Nm |
| Weight per cutting width | 500 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 50
KEMROC KR 50 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM40 |
| Cutter drum diameter (C) | 450 mm |
| Cutting force at 380 bar | 27.3 kN |
| Cutting width (B) | 690 mm |
| Drum cutter length (A) | 1014 mm |
| Max. oil flow | 130 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 40 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 22 Type |
| Rated power | 45 kW |
| Recommended excavator weight | 9 – 15 t |
| Recommended oil flow | 95 l/min |
| Recommended rpm | 95 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 12/45/38/22 HC |
| Torque at 380 bar | 6100 Nm |
| Weight per cutting width | 550 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 65
KEMROC KR 65 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM40 |
| Cutter drum diameter (C) | 587 mm |
| Cutting force at 380 bar | 41.8 kN |
| Cutting width (B) | 805 mm |
| Drum cutter length (A) | 1195 mm |
| Max. oil flow | 170 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 60 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 30 HD Type |
| Rated power | 65 kW |
| Recommended excavator weight | 12 – 18 t |
| Recommended oil flow | 145 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 12300 Nm |
| Weight per cutting width | 900 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 70
KEMROC KR 70 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM40 |
| Cutter drum diameter (C) | 587 mm |
| Cutting force at 380 bar | 50.1 kN |
| Cutting width (B) | 805 mm |
| Drum cutter length (A) | 1195 mm |
| Max. oil flow | 190 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 70 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 30 HD Type |
| Rated power | 70 kW |
| Recommended excavator weight | 15 – 23 t |
| Recommended oil flow | 175 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 14700 Nm |
| Weight per cutting width | 900 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 80
KEMROC KR 80 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutter drum diameter (C) | 587 mm |
| Cutting force at 380 bar | 53.6 kN |
| Cutting width (B) | 805 mm |
| Drum cutter length (A) | 1235 mm |
| Max. oil flow | 210 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 80 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 30 HD Type |
| Rated power | 80 kW |
| Recommended excavator weight | 15 – 25 t |
| Recommended oil flow | 185 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 15700 Nm |
| Weight per cutting width | 1070 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 110
KEMROC KR 110 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 52.7 kN |
| Cutting width (B) | 1040 mm |
| Drum cutter length (A) | 1470 mm |
| Max. oil flow | 250 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 90 MPa |
| Number of picks | 60 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 110 kW |
| Recommended excavator weight | 20 – 35 t |
| Recommended oil flow | 225 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 19000 Nm |
| Weight per cutting width | 2050 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 110 C
KEMROC KR 110 C — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 52.7 kN |
| Cutting width (B) | 880 mm |
| Drum cutter length (A) | 1470 mm |
| Max. oil flow | 250 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 90 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 110 kW |
| Recommended excavator weight | 20 – 35 t |
| Recommended oil flow | 225 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 19000 Nm |
| Weight per cutting width | 1850 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 120
KEMROC KR 120 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 75.6 kN |
| Cutting width (B) | 1040 mm |
| Drum cutter length (A) | 1470 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 60 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 25 – 45 t |
| Recommended oil flow | 320 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 27200 Nm |
| Weight per cutting width | 2050 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 120 C
KEMROC KR 120 C — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 75.6 kN |
| Cutting width (B) | 880 mm |
| Drum cutter length (A) | 1470 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 20 – 40 t |
| Recommended oil flow | 320 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 27200 Nm |
| Weight per cutting width | 1850 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 150
KEMROC KR 150 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 82.7 kN |
| Cutting width (B) | 1040 mm |
| Drum cutter length (A) | 1470 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 60 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 30 – 50 t |
| Recommended oil flow | 330 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 29800 Nm |
| Weight per cutting width | 2050 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 150 C
KEMROC KR 150 C — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 82.7 kN |
| Cutting width (B) | 880 mm |
| Drum cutter length (A) | 1470 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 44 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 30 – 50 t |
| Recommended oil flow | 330 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 29800 Nm |
| Weight per cutting width | 1850 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 155
KEMROC KR 155 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 90.7 kN |
| Cutting width (B) | 1040 mm |
| Drum cutter length (A) | 1470 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 60 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 30 – 50 t |
| Recommended oil flow | 340 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 32700 Nm |
| Weight per cutting width | 2050 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 165
KEMROC KR 165 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM70 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 101.1 kN |
| Cutting width (B) | 1250 mm |
| Drum cutter length (A) | 1590 mm |
| KR range | LB40 |
| Max. oil flow | 400 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 110 MPa |
| Number of picks | 64 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 160 kW |
| Recommended excavator weight | 35 – 55 t |
| Recommended oil flow | 380 l/min |
| Recommended rpm | 65 rpm |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 36400 Nm |
| Weight per cutting width | 2800 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 165C
KEMROC KR 165C — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM70 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 101.1 kN |
| Cutting width (B) | 1050 mm |
| Drum cutter length (A) | 1590 mm |
| Max. oil flow | 400 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 110 MPa |
| Number of picks | 60 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 160 kW |
| Recommended excavator weight | 35 – 55 t |
| Recommended oil flow | 380 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 36400 Nm |
| Weight per cutting width | 2550 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 175
KEMROC KR 175 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM70 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 119.4 kN |
| Cutting width (B) | 1250 mm |
| Drum cutter length (A) | 1590 mm |
| Max. oil flow | 420 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 110 MPa |
| Number of picks | 64 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 160 kW |
| Recommended excavator weight | 40 – 55 t |
| Recommended oil flow | 400 l/min |
| Recommended rpm | 55 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 43000 Nm |
| Weight per cutting width | 2800 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 175C
KEMROC KR 175C — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM70 |
| Cutter drum diameter (C) | 720 mm |
| Cutting force at 380 bar | 119.4 kN |
| Cutting width (B) | 1050 mm |
| Drum cutter length (A) | 1590 mm |
| Max. oil flow | 420 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 110 MPa |
| Number of picks | 60 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 160 kW |
| Recommended excavator weight | 40 – 55 t |
| Recommended oil flow | 400 l/min |
| Recommended rpm | 55 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 43000 Nm |
| Weight per cutting width | 2550 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 200
KEMROC KR 200 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter drum diameter (C) | 825 mm |
| Cutting force at 380 bar | 123.3 kN |
| Cutting width (B) | 1330 mm |
| Drum cutter length (A) | 1660 mm |
| Max. oil flow | 500 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 140 MPa |
| Number of picks | 64 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 200 kW |
| Recommended excavator weight | 50 – 70 t |
| Recommended oil flow | 430 l/min |
| Recommended rpm | 50 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 51000 Nm |
| Weight per cutting width | 3720 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 250
KEMROC KR 250 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter drum diameter (C) | 825 mm |
| Cutting force at 380 bar | 145.3 kN |
| Cutting width (B) | 1330 mm |
| Drum cutter length (A) | 1650 mm |
| Max. oil flow | 600 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 140 MPa |
| Number of picks | 64 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 200 kW |
| Recommended excavator weight | 60 – 80 t |
| Recommended oil flow | 580 l/min |
| Recommended rpm | 60 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 60000 Nm |
| Weight per cutting width | 3720 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 400
KEMROC KR 400 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter drum diameter (C) | 950 mm |
| Cutting force at 380 bar | 255.3 kN |
| Cutting width (B) | 1650 mm |
| Drum cutter length (A) | 2050 mm |
| Max. oil flow | 1200 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 180 MPa |
| Number of picks | 88 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 400 kW |
| Recommended excavator weight | 80 – 125 t |
| Recommended oil flow | 885 l/min |
| Recommended rpm | 45 rpm |
| Standard hole pattern | LB50 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 121500 Nm |
| Weight per cutting width | 7100 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 400C
KEMROC KR 400C — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter drum diameter (C) | 950 mm |
| Cutting force at 380 bar | 255.3 kN |
| Cutting width (B) | 1300 mm |
| Drum cutter length (A) | 2050 mm |
| Max. oil flow | 1200 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 180 MPa |
| Number of picks | 68 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 400 kW |
| Recommended excavator weight | 80 – 125 t |
| Recommended oil flow | 885 l/min |
| Recommended rpm | 45 rpm |
| Standard hole pattern | LB50 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 121500 Nm |
| Weight per cutting width | 6300 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 450
KEMROC KR 450 — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter drum diameter (C) | 950 mm |
| Cutting force at 380 bar | 301.0 kN |
| Cutting width (B) | 1650 mm |
| Drum cutter length (A) | 2050 mm |
| Max. oil flow | 1200 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 180 MPa |
| Number of picks | 88 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 400 kW |
| Recommended excavator weight | 100 – 125 t |
| Recommended oil flow | 1045 l/min |
| Recommended rpm | 45 rpm |
| Standard hole pattern | LB50 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 143000 Nm |
| Weight per cutting width | 7100 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KR 450C
KEMROC KR 450C — Spur-gear drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter drum diameter (C) | 950 mm |
| Cutting force at 380 bar | 301.0 kN |
| Cutting width (B) | 1300 mm |
| Drum cutter length (A) | 2050 mm |
| Max. oil flow | 1200 l/min |
| Max. operating pressure | 380 bar |
| Max. rock compressive strength | 180 MPa |
| Number of picks | 68 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 400 kW |
| Recommended excavator weight | 100 – 125 t |
| Recommended oil flow | 1045 l/min |
| Recommended rpm | 45 rpm |
| Standard hole pattern | LB50 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 143000 Nm |
| Weight per cutting width | 6300 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD — Direct-drive drum cutters
KRD 15
KEMROC KRD 15 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutter drum diameter (C) | 300 mm |
| Cutting force at 380 bar | 6.9 kN |
| Cutting width (B) | 500 mm |
| Drum cutter length (A) | 511 mm |
| Max. oil flow | 40 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 20 MPa |
| Number of picks | 66 Pcs |
| Pick box | PH 14 Type |
| Rated power | 15 kW |
| Recommended excavator weight | 0,5 – 2 t |
| Recommended oil flow | 25 l/min |
| Recommended rpm | 145 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 15/29/26/14 C |
| Torque at 380 bar | 1000 Nm |
| Weight per cutting width | 135 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 18
KEMROC KRD 18 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutter drum diameter (C) | 300 mm |
| Cutting force at 380 bar | 14.1 kN |
| Cutting width (B) | 500 mm |
| Drum cutter length (A) | 511 mm |
| Max. oil flow | 65 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 20 MPa |
| Number of picks | 66 Pcs |
| Pick box | PH 14 Type |
| Rated power | 18 kW |
| Recommended excavator weight | 2 – 4 t |
| Recommended oil flow | 40 l/min |
| Recommended rpm | 115 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 15/29/26/14 C |
| Torque at 380 bar | 2100 Nm |
| Weight per cutting width | 135 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 30
KEMROC KRD 30 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM35 |
| Cutter drum diameter (C) | 370 mm |
| Cutting force at 380 bar | 23.9 kN |
| Cutting width (B) | 629 mm |
| Drum cutter length (A) | 588 mm |
| Max. oil flow | 100 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 30 MPa |
| Number of picks | 56 Pcs |
| Pick box | PH 20 Type |
| Rated power | 30 kW |
| Recommended excavator weight | 5 – 8 t |
| Recommended oil flow | 80 l/min |
| Recommended rpm | 110 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/46/38/20 C |
| Torque at 380 bar | 4400 Nm |
| Weight per cutting width | 250 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 45
KEMROC KRD 45 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM40 |
| Cutter drum diameter (C) | 447 mm |
| Cutting force at 380 bar | 27.5 kN |
| Cutting width (B) | 743 mm |
| Drum cutter length (A) | 670 mm |
| Max. oil flow | 130 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 40 MPa |
| Number of picks | 46 Pcs |
| Pick box | PH 22 Type |
| Rated power | 45 kW |
| Recommended excavator weight | 9 – 16 t |
| Recommended oil flow | 110 l/min |
| Recommended rpm | 110 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 12/45/38/22 HC |
| Torque at 380 bar | 6100 Nm |
| Weight per cutting width | 380 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 70
KEMROC KRD 70 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutter drum diameter (C) | 612 mm |
| Cutting force at 380 bar | 53.4 kN |
| Cutting width (B) | 946 mm |
| Drum cutter length (A) | 951 mm |
| Max. oil flow | 230 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 850 MPa |
| Number of picks | 40 Pcs |
| Pick box | PH 30 HD Type |
| Rated power | 70 kW |
| Recommended excavator weight | 17 – 25 t |
| Recommended oil flow | 200 l/min |
| Recommended rpm | 75 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 16300 Nm |
| Weight per cutting width | 850 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 100
KEMROC KRD 100 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 742 mm |
| Cutting force at 380 bar | 51.1 kN |
| Cutting width (B) | 1020 mm |
| Drum cutter length (A) | 1070 mm |
| Max. oil flow | 250 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 90 MPa |
| Number of picks | 48 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 110 kW |
| Recommended excavator weight | 20 – 40 t |
| Recommended oil flow | 225 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 19000 Nm |
| Weight per cutting width | 1400 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 120
KEMROC KRD 120 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 742 mm |
| Cutting force at 380 bar | 73.4 kN |
| Cutting width (B) | 1020 mm |
| Drum cutter length (A) | 1070 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 48 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 25 – 40 t |
| Recommended oil flow | 320 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 27200 Nm |
| Weight per cutting width | 1400 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 150
KEMROC KRD 150 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 742 mm |
| Cutting force at 380 bar | 80.2 kN |
| Cutting width (B) | 1020 mm |
| Drum cutter length (A) | 1070 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 48 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 30 – 40 t |
| Recommended oil flow | 330 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 29800 Nm |
| Weight per cutting width | 1400 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 155
KEMROC KRD 155 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter drum diameter (C) | 742 mm |
| Cutting force at 380 bar | 88.0 kN |
| Cutting width (B) | 1020 mm |
| Drum cutter length (A) | 1070 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 48 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 30 – 40 t |
| Recommended oil flow | 340 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 32700 Nm |
| Weight per cutting width | 1400 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 165
KEMROC KRD 165 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM70 |
| Cutter drum diameter (C) | 725 mm |
| Cutting force at 380 bar | 100.4 kN |
| Cutting width (B) | 1260 mm |
| Drum cutter length (A) | 1072 mm |
| Max. oil flow | 400 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 110 MPa |
| Number of picks | 64 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 160 kW |
| Recommended excavator weight | 35 – 50 t |
| Recommended oil flow | 380 l/min |
| Recommended rpm | 65 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 36400 Nm |
| Weight per cutting width | 1850 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRD 175
KEMROC KRD 175 — Direct-drive drum cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM70 |
| Cutter drum diameter (C) | 725 mm |
| Cutting force at 380 bar | 118.6 kN |
| Cutting width (B) | 1260 mm |
| Drum cutter length (A) | 1072 mm |
| Max. oil flow | 420 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 110 MPa |
| Number of picks | 64 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 160 kW |
| Recommended excavator weight | 35 – 50 t |
| Recommended oil flow | 400 l/min |
| Recommended rpm | 55 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 43000 Nm |
| Weight per cutting width | 1850 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC — Bullhead cutters
KRC 40
KEMROC KRC 40 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 415 mm |
| Compatible rotation unit (KRM) | KRM35 |
| Cutter length (A) | 980 mm |
| Cutting force at 380 bar | 23 kN |
| Cutting width (B) | 530 mm |
| Max. oil flow | 110 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 30 MPa |
| Number of picks | 60 Pcs |
| Pick box | PH 20 Type |
| Rated power | 40 kW |
| Recommended excavator weight | 7 – 11 t |
| Recommended oil flow | 80 l/min |
| Recommended rpm | 110 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/46/38/20 |
| Torque at 380 bar | 4800 Nm |
| Weight | 475 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC 60
KEMROC KRC 60 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 545 mm |
| Compatible rotation unit (KRM) | KRM40 |
| Cutter length (A) | 1200 mm |
| Cutting force at 380 bar | 33.0 kN |
| Cutting width (B) | 600 mm |
| Max. oil flow | 155 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Number of picks | 56 Pcs |
| Pick box | PH 22 HD Type |
| Rated power | 60 kW |
| Recommended excavator weight | 12 – 17 t |
| Recommended oil flow | 115 l/min |
| Recommended rpm | 85 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 15/46/38/22 C |
| Torque at 380 bar | 9100 Nm |
| Weight | 850 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC 100
KEMROC KRC 100 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 650 mm |
| Compatible rotation unit (KRM) | KRM50 |
| Cutter length (A) | 1390 mm |
| Cutting force at 380 bar | 48 kN |
| Cutting width (B) | 810 mm |
| Max. oil flow | 230 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 80 MPa |
| Number of picks | 52 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 100 kW |
| Recommended excavator weight | 18 – 30 t |
| Recommended oil flow | 205 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 15700 Nm |
| Weight | 1400 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC 110
KEMROC KRC 110 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 650 mm |
| Compatible rotation unit (KRM) | KRM50 |
| Cutter length (A) | 1390 mm |
| Cutting force at 380 bar | 60 kN |
| Cutting width (B) | 810 mm |
| Max. oil flow | 285 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 80 MPa |
| Number of picks | 52 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 110 kW |
| Recommended excavator weight | 20 – 32 t |
| Recommended oil flow | 255 l/min |
| Recommended rpm | 70 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 19400 Nm |
| Weight | 1400 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC 140
KEMROC KRC 140 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 700 mm |
| Compatible rotation unit (KRM) | KRM60 |
| Cutter length (A) | 1520 mm |
| Cutting force at 380 bar | 69 kN |
| Cutting width (B) | 880 mm |
| Max. oil flow | 300 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 52 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 140 kW |
| Recommended excavator weight | 25 – 40 t |
| Recommended oil flow | 265 l/min |
| Recommended rpm | 75 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 24200 Nm |
| Weight | 2000 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC 150
KEMROC KRC 150 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 700 mm |
| Compatible rotation unit (KRM) | KRM60 |
| Cutter length (A) | 1520 mm |
| Cutting force at 380 bar | 86 kN |
| Cutting width (B) | 880 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 52 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 150 kW |
| Recommended excavator weight | 35 – 50 t |
| Recommended oil flow | 330 l/min |
| Recommended rpm | 75 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 30200 Nm |
| Weight | 2000 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC 160
KEMROC KRC 160 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 700 mm |
| Compatible rotation unit (KRM) | KRM70 |
| Cutter length (A) | 1520 mm |
| Cutting force at 380 bar | 93 kN |
| Cutting width (B) | 880 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 120 MPa |
| Number of picks | 52 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 160 kW |
| Recommended excavator weight | 35 – 55 t |
| Recommended oil flow | 360 l/min |
| Recommended rpm | 75 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 Q |
| Torque at 380 bar | 32700 Nm |
| Weight | 2000 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC 220
KEMROC KRC 220 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 925 mm |
| Compatible rotation unit (KRM) | KRM80 |
| Cutter length (A) | 1860 mm |
| Cutting force at 380 bar | 131 kN |
| Cutting width (B) | 1200 mm |
| Max. oil flow | 610 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 140 MPa |
| Number of picks | 68 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 50 – 70 t |
| Recommended oil flow | 520 l/min |
| Recommended rpm | 50 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 60500 Nm |
| Weight | 4300 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRC 240
KEMROC KRC 240 — Bullhead cutters. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Average drum diameter (C) | 925 mm |
| Compatible rotation unit (KRM) | KRM80 |
| Cutter length (A) | 1860 mm |
| Cutting force at 380 bar | 141 kN |
| Cutting width (B) | 1200 mm |
| Max. oil flow | 630 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 140 MPa |
| Number of picks | 68 Pcs |
| Pick box | PH 38 HD Type |
| Rated power | 240 kW |
| Recommended excavator weight | 55 – 80 t |
| Recommended oil flow | 560 l/min |
| Recommended rpm | 50 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 25/80/80/38 C |
| Torque at 380 bar | 65300 Nm |
| Weight | 4300 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW — Cutter wheels
DMW 90 Wheel 400
KEMROC DMW 90 Wheel 400 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutter depth (A) | 400 mm |
| Cutting force at 380 bar | 19 kN |
| Cutting wheel diameter (C) | 1210 mm |
| Cutting width (B) | 80 | 130 | 200 mm |
| Max. oil flow | 200 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 60 MPa |
| Number of picks | 30 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 90 kW |
| Recommended excavator weight | 14 – 25 t |
| Recommended oil flow | 170 l/min |
| Recommended rpm | 90 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 11300 Nm |
| Weight of cutter wheel, approx. ** | 250 kg |
| Weight of cutting wheel | 400 kg |
| Weight of dipping device, approx. | 55 kg |
| Weight of drive unit, approx. | 1100 kg |
| Weight per cutting width | 1805 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 90 Wheel 600
KEMROC DMW 90 Wheel 600 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutter depth (A) | 600 mm |
| Cutting force at 380 bar | 14 kN |
| Cutting wheel diameter (C) | 1610 mm |
| Cutting width (B) | 80 | 130 | 200 mm |
| Max. oil flow | 200 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 40 MPa |
| Number of picks | 40 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 90 kW |
| Recommended excavator weight | 14 – 25 t |
| Recommended oil flow | 150 l/min |
| Recommended rpm | 80 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 11300 Nm |
| Weight of cutter wheel, approx. ** | 250 kg |
| Weight of cutting wheel | 800 kg |
| Weight of dipping device, approx. | 55 kg |
| Weight of drive unit, approx. | 1100 kg |
| Weight per cutting width | 2205 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 130 Wheel 400
KEMROC DMW 130 Wheel 400 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter depth (A) | 400 mm |
| Cutting force at 380 bar | 41 kN |
| Cutting wheel diameter (C) | 1.210 mm |
| Cutting width (B) | 80 | 130 | 200 mm |
| Max. oil flow | 340 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 30 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 130 kW |
| Recommended excavator weight | 20 – 40 t |
| Recommended oil flow | 320 l/min |
| Recommended rpm | 80 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 24500 Nm |
| Weight of cutter wheel, approx. ** | 300 kg |
| Weight of cutting wheel | 400 kg |
| Weight of dipping device, approx. | 55 kg |
| Weight of drive unit, approx. | 1150 kg |
| Weight per cutting width | 1905 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 130 Wheel 600
KEMROC DMW 130 Wheel 600 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter depth (A) | 600 mm |
| Cutting force at 380 bar | 31 kN |
| Cutting wheel diameter (C) | 1610 mm |
| Cutting width (B) | 80 | 130 | 200 mm |
| Max. oil flow | 340 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 80 MPa |
| Number of picks | 40 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 130 kW |
| Recommended excavator weight | 20 – 40 t |
| Recommended oil flow | 320 l/min |
| Recommended rpm | 80 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 24500 Nm |
| Weight of cutter wheel, approx. ** | 300 kg |
| Weight of cutting wheel | 800 kg |
| Weight of dipping device, approx. | 55 kg |
| Weight of drive unit, approx. | 1150 kg |
| Weight per cutting width | 2305 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 130 Wheel 800
KEMROC DMW 130 Wheel 800 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutter depth (A) | 800 mm |
| Cutting force at 380 bar | 24 kN |
| Cutting wheel diameter (C) | 2010 mm |
| Cutting width (B) | 80 | 130 | 200 mm |
| Max. oil flow | 340 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 60 MPa |
| Number of picks | 50 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 130 kW |
| Recommended excavator weight | 25 – 40 t |
| Recommended oil flow | 250 l/min |
| Recommended rpm | 60 rpm |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 Q |
| Torque at 380 bar | 24500 Nm |
| Weight of cutter wheel, approx. ** | 550 kg |
| Weight of cutting wheel | 1500 kg |
| Weight of dipping device, approx. | 55 kg |
| Weight of drive unit, approx. | 1400 kg |
| Weight per cutting width | 3505 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 220 Wheel 600
KEMROC DMW 220 Wheel 600 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter depth (A) | 550 mm |
| Cutting force at 380 bar | 74 kN |
| Cutting wheel diameter (C) | 1610 mm |
| Cutting width (B) | 130 | 200 | 400 mm |
| Max. oil flow | 650 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 120 MPa |
| Number of picks | 40 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 40 – 60 t |
| Recommended oil flow | 550 l/min |
| Recommended rpm | 55 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 22/75/70/30 Q |
| Torque at 380 bar | 59500 Nm |
| Weight of cutter wheel, approx. ** | 920 kg |
| Weight of cutting wheel | 800 kg |
| Weight of dipping device, approx. | 180 kg |
| Weight of drive unit, approx. | 2750 kg |
| Weight per cutting width | 4650 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 220 Wheel 800
KEMROC DMW 220 Wheel 800 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter depth (A) | 750 mm |
| Cutting force at 380 bar | 59 kN |
| Cutting wheel diameter (C) | 2010 mm |
| Cutting width (B) | 130 | 200 | 400 mm |
| Max. oil flow | 650 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 120 MPa |
| Number of picks | 42 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 40 – 60 t |
| Recommended oil flow | 550 l/min |
| Recommended rpm | 55 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 22/75/70/30 Q |
| Torque at 380 bar | 59500 Nm |
| Weight of cutter wheel, approx. ** | 920 kg |
| Weight of cutting wheel | 1250 kg |
| Weight of dipping device, approx. | 180 kg |
| Weight of drive unit, approx. | 2750 kg |
| Weight per cutting width | 5100 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 220 Wheel 1000
KEMROC DMW 220 Wheel 1000 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter depth (A) | 1000 mm |
| Cutting force at 380 bar | 46 kN |
| Cutting wheel diameter (C) | 2570 mm |
| Cutting width (B) | 130 | 200 | 400 mm |
| Max. oil flow | 650 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 50 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 45 – 60 t |
| Recommended oil flow | 500 l/min |
| Recommended rpm | 50 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 22/75/70/30 Q |
| Torque at 380 bar | 59500 Nm |
| Weight of cutter wheel, approx. ** | 920 kg |
| Weight of cutting wheel | 2250 kg |
| Weight of dipping device, approx. | 180 kg |
| Weight of drive unit, approx. | 2750 kg |
| Weight per cutting width | 6100 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 240 Wheel 600
KEMROC DMW 240 Wheel 600 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter depth (A) | 550 mm |
| Cutting force at 380 bar | 81 kN |
| Cutting wheel diameter (C) | 1610 mm |
| Cutting width (B) | 130 | 200 | 400 mm |
| Max. oil flow | 650 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 120 MPa |
| Number of picks | 40 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 40 – 60 t |
| Recommended oil flow | 550 l/min |
| Recommended rpm | 50 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 22/75/70/30 Q |
| Torque at 380 bar | 65300 Nm |
| Weight of cutter wheel, approx. ** | 920 kg |
| Weight of cutting wheel | 800 kg |
| Weight of dipping device, approx. | 180 kg |
| Weight of drive unit, approx. | 2750 kg |
| Weight per cutting width | 4650 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 240 Wheel 800
KEMROC DMW 240 Wheel 800 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter depth (A) | 750 mm |
| Cutting force at 380 bar | 65 kN |
| Cutting wheel diameter (C) | 2010 mm |
| Cutting width (B) | 130 | 200 | 400 mm |
| Max. oil flow | 650 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 120 MPa |
| Number of picks | 42 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 40-60 t |
| Recommended oil flow | 550 l/min |
| Recommended rpm | 50 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 22/75/70/30 Q |
| Torque at 380 bar | 65300 Nm |
| Weight of cutter wheel, approx. ** | 920 kg |
| Weight of cutting wheel | 1250 kg |
| Weight of dipping device, approx. | 180 kg |
| Weight of drive unit, approx. | 2750 kg |
| Weight per cutting width | 5100 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 240 Wheel 1000
KEMROC DMW 240 Wheel 1000 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM80 |
| Cutter depth (A) | 1000 mm |
| Cutting force at 380 bar | 51 kN |
| Cutting wheel diameter (C) | 2570 mm |
| Cutting width (B) | 130 | 200 | 400 mm |
| Max. oil flow | 650 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 100 MPa |
| Number of picks | 50 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 220 kW |
| Recommended excavator weight | 45 – 60 t |
| Recommended oil flow | 500 l/min |
| Recommended rpm | 45 rpm |
| Standard hole pattern | LB40 |
| Standard pick | 22/75/70/30 Q |
| Torque at 380 bar | 65300 Nm |
| Weight of cutter wheel, approx. ** | 920 kg |
| Weight of cutting wheel | 2250 kg |
| Weight of dipping device, approx. | 180 kg |
| Weight of drive unit, approx. | 2750 kg |
| Weight per cutting width | 6100 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
DMW 400 Wheel 1000
KEMROC DMW 400 Wheel 1000 — Cutter wheels. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter length (A) | 1000 mm |
| Cutting depth with sliding device | 900 mm |
| Cutting force at 380 bar | 105.7 kN |
| Cutting wheel diameter (C) | 2700 mm |
| Cutting width (B) | 130 | 200 | 400 mm |
| Max. oil flow at 50 bar | 1000 l/min |
| Max. operating pressure | 400 bar |
| Max. rebar diameter in re-enforced concrete * | 30 mm |
| Max. rock compressive strength | 140 MPa |
| Pick box | PH 32 HD Type |
| Rated power | 400 kW |
| Recomm. oil flow according to wheel diameter | 600 – 900 l/min |
| Recommended excavator weight | 50 – 70 | 70 – 120 t |
| Recommended rpm | 25 rpm |
| Standard pick | ER 22/75/70/30 Q |
| Torque at 380 bar | 142730 Nm |
| Weight of cutter wheel, approx. ** | 3300 kg |
| Weight of cutting wheel | 250 kg |
| Weight of dipping device, approx. | 1450 kg |
| Weight of drive unit, approx. | 5500 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX — Powertool drives
KRX 30
KEMROC KRX 30 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 23.9 kN |
| Diameter of standard cutter head | 370 mm |
| Hex connection, standard | 80 mm |
| Length of drive unit | 550 mm |
| Length of standard cutter head | 350 mm |
| Max. drill diameter | 600 mm |
| Max. drilling depth at max. drill diameter | 1500 mm |
| Max. drilling depth at min. drill diameter | 2500 mm |
| Max. idle oil flow | 110 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 10 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 26 Pcs |
| Pick box | PH 22 Type |
| Rated power | 30 kW |
| Recommended excavator weight | 5 – 8 t |
| Recommended idle oil flow | 30 – 65 l/min |
| Recommended idle rpm | 80 rpm |
| Standard hole pattern | LB10 |
| Standard pick (dragon tooth) | 22/46/38/22 HC type |
| Standard pick (round shaft) | 12/45/38/22 HC type |
| Torque at 380 bar | 4400 Nm |
| Total weight | 227 kg |
| Weight of milling attachment | 67 kg |
| Weight without attachment | 160 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 45
KEMROC KRX 45 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 30.7 kN |
| Diameter of standard cutter head | 400 mm |
| Hex connection, standard | 80 mm |
| Length of drive unit | 610 mm |
| Length of standard cutter head | 350 mm |
| Max. drill diameter | 800 mm |
| Max. drilling depth at max. drill diameter | 1500 mm |
| Max. drilling depth at min. drill diameter | 3000 mm |
| Max. idle oil flow | 130 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 20 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 29 Pcs |
| Pick box | PH 22 Type |
| Rated power | 45 kW |
| Recommended excavator weight | 9 – 12 t |
| Recommended idle oil flow | 35 – 80 l/min |
| Recommended idle rpm | 65 rpm |
| Standard hole pattern | LB20 |
| Standard pick (dragon tooth) | 22/46/38/22 HC type |
| Standard pick (round shaft) | 12/45/38/22 HC type |
| Torque at 380 bar | 6100 Nm |
| Total weight | 326 kg |
| Weight of milling attachment | 86 kg |
| Weight without attachment | 240 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 65
KEMROC KRX 65 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 56.5 kN |
| Diameter of standard cutter head | 400 mm |
| Hex connection, standard | 80 mm |
| Length of drive unit | 610 mm |
| Length of standard cutter head | 350 mm |
| Max. drill diameter | 1000 mm |
| Max. drilling depth at max. drill diameter | 2000 mm |
| Max. drilling depth at min. drill diameter | 4000 mm |
| Max. idle oil flow | 190 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 20 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 29 Pcs |
| Pick box | PH 22 Type |
| Rated power | 65 kW |
| Recommended excavator weight | 13 – 20 t |
| Recommended idle oil flow | 80 – 150 l/min |
| Recommended idle rpm | 90 rpm |
| Standard hole pattern | LB20 |
| Standard pick (dragon tooth) | 22/46/38/22 HC type |
| Standard pick (round shaft) | 12/45/38/22 HC type |
| Torque at 380 bar | 11300 Nm |
| Total weight | 346 kg |
| Weight of milling attachment | 86 kg |
| Weight without attachment | 260 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 68
KEMROC KRX 68 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 73.5 kN |
| Diameter of standard cutter head | 400 mm |
| Hex connection, standard | 80 mm |
| Length of drive unit | 610 mm |
| Length of standard cutter head | 350 mm |
| Max. drill diameter | 1000 mm |
| Max. drilling depth at max. drill diameter | 2000 mm |
| Max. drilling depth at min. drill diameter | 4000 mm |
| Max. idle oil flow | 190 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 20 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 29 Pcs |
| Pick box | PH 22 Type |
| Rated power | 65 kW |
| Recommended excavator weight | 15 – 23 t |
| Recommended idle oil flow | 80 – 145 l/min |
| Recommended idle rpm | 70 rpm |
| Standard hole pattern | LB20 |
| Standard pick (dragon tooth) | 22/46/38/22 HC type |
| Standard pick (round shaft) | 12/45/38/22 HC type |
| Torque at 380 bar | 14700 Nm |
| Total weight | 346 kg |
| Weight of milling attachment | 86 kg |
| Weight without attachment | 260 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 70
KEMROC KRX 70 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 72.6 kN |
| Diameter of standard cutter head | 450 mm |
| Hex connection, standard | 160 mm |
| Length of drive unit | 830 mm |
| Length of standard cutter head | 400 mm |
| Max. drill diameter | 1000 mm |
| Max. drilling depth at max. drill diameter | 2000 mm |
| Max. drilling depth at min. drill diameter | 7000 mm |
| Max. idle oil flow | 300 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 30 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 30 Pcs |
| Pick box | PH 22 Type |
| Rated power | 70 kW |
| Recommended excavator weight | 15 – 25 t |
| Recommended idle oil flow | 105 – 195 l/min |
| Recommended idle rpm | 70 rpm |
| Standard hole pattern | LB30 |
| Standard pick (dragon tooth) | 22/46/38/22 HC type |
| Standard pick (round shaft) | 12/45/38/22 HC type |
| Torque at 380 bar | 16300 Nm |
| Total weight | 617 kg |
| Weight of milling attachment | 97 kg |
| Weight without attachment | 520 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 110
KEMROC KRX 110 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 114.4 kN |
| Diameter of standard cutter head | 520 mm |
| Hex connection, standard | 160 mm |
| Length of drive unit | 842 mm |
| Length of standard cutter head | 430 mm |
| Max. drill diameter | 1300 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 7000 mm |
| Max. idle oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 50 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 25 Pcs |
| Pick box | PH 32HD Type |
| Rated power | 110 kW |
| Recommended excavator weight | 20 – 35 t |
| Recommended idle oil flow | 210 – 350 l/min |
| Recommended idle rpm | 75 rpm |
| Standard hole pattern | LB30 |
| Standard pick (dragon tooth) | DT 22/90/70/30 HQ type |
| Standard pick (round shaft) | 17/75/70/30 Q type |
| Torque at 380 bar | 29800 Nm |
| Total weight | 682 kg |
| Weight of milling attachment | 142 kg |
| Weight without attachment | 540 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 120
KEMROC KRX 120 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 114.4 kN |
| Diameter of standard cutter head | 520 mm |
| Hex connection, standard | 160 mm |
| Length of drive unit | 842 mm |
| Length of standard cutter head | 430 mm |
| Max. drill diameter | 1300 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 7000 mm |
| Max. idle oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 50 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 25 Pcs |
| Pick box | PH 32HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 25 – 40 t |
| Recommended idle oil flow | 175 – 295 l/min |
| Recommended idle rpm | 65 rpm |
| Standard hole pattern | LB30 |
| Standard pick (dragon tooth) | DT 22/90/70/30 HQ type |
| Standard pick (round shaft) | 17/75/70/30 Q type |
| Torque at 380 bar | 29800 Nm |
| Total weight | 682 kg |
| Weight of milling attachment | 142 kg |
| Weight without attachment | 540 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 130
KEMROC KRX 130 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 130.6 kN |
| Diameter of standard cutter head | 520 mm |
| Hex connection, standard | 160 mm |
| Length of drive unit | 842 mm |
| Length of standard cutter head | 430 mm |
| Max. drill diameter | 1300 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 7000 mm |
| Max. idle oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 50 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 25 Pcs |
| Pick box | PH 32HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 25 – 40 t |
| Recommended idle oil flow | 195 – 310 l/min |
| Recommended idle rpm | 60 rpm |
| Standard hole pattern | LB30 |
| Standard pick (dragon tooth) | DT 22/90/70/30 HQ type |
| Standard pick (round shaft) | 17/75/70/30 Q type |
| Torque at 380 bar | 34000 Nm |
| Total weight | 682 kg |
| Weight of milling attachment | 142 kg |
| Weight without attachment | 540 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 140
KEMROC KRX 140 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 132.3 kN |
| Diameter of standard cutter head | 550 mm |
| Hex connection, standard | 160 mm |
| Length of drive unit | 875 mm |
| Length of standard cutter head | 450 mm |
| Max. drill diameter | 1500 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 8000 mm |
| Max. idle oil flow | 390 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 60 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 30 Pcs |
| Pick box | PH 32HD Type |
| Rated power | 140 kW |
| Recommended excavator weight | 30 – 50 t |
| Recommended idle oil flow | 220 – 350 l/min |
| Recommended idle rpm | 60 rpm |
| Standard hole pattern | LB30 |
| Standard pick (dragon tooth) | DT 22/90/70/30 HQ type |
| Standard pick (round shaft) | 19/75/70/30 Q type |
| Torque at 380 bar | 36400 Nm |
| Total weight | 1095 kg |
| Weight of milling attachment | 195 kg |
| Weight without attachment | 900 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 150
KEMROC KRX 150 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 156.3 kN |
| Diameter of standard cutter head | 550 mm |
| Hex connection, standard | 160 mm |
| Length of drive unit | 875 mm |
| Length of standard cutter head | 450 mm |
| Max. drill diameter | 1500 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 8000 mm |
| Max. idle oil flow | 420 l/min |
| Max. operating pressure | 400 bar |
| Max. uniaxial compressive strength of the ground | 60 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 30 Pcs |
| Pick box | PH 32HD Type |
| Rated power | 140 kW |
| Recommended excavator weight | 35 – 50 t |
| Recommended idle oil flow | 250 – 390 l/min |
| Recommended idle rpm | 55 rpm |
| Standard hole pattern | LB40 |
| Standard pick (dragon tooth) | DT 22/90/70/30 HQ type |
| Standard pick (round shaft) | 19/75/70/30 Q type |
| Torque at 380 bar | 43000 Nm |
| Total weight | 1095 kg |
| Weight of milling attachment | 195 kg |
| Weight without attachment | 900 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRX 240
KEMROC KRX 240 — Powertool drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutting force at 380 bar | 166.1 kN |
| Diameter of standard cutter head | 920 mm |
| Hex connection, standard | 200 mm |
| Length of drive unit | 1112 mm |
| Length of standard cutter head | 620 mm |
| Max. drill diameter | 1500 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 8000 mm |
| Max. idle oil flow | 850 l/min |
| Max. operating pressure | 320 bar |
| Max. uniaxial compressive strength of the ground | 60 Mpa |
| Min. drill diameter | 270 mm |
| Number of picks | 37 Pcs |
| Pick box | PH 38HD Type |
| Rated power | 240 kW |
| Recommended excavator weight | 80 – 125 t |
| Recommended idle oil flow | 600 – 800 l/min |
| Recommended idle rpm | 55 rpm |
| Standard pick (dragon tooth) | – type |
| Standard pick (round shaft) | 25/80/80/38 C type |
| Torque at 380 bar | 76400 Nm |
| Total weight | 1235 kg |
| Weight of milling attachment | – kg |
| Weight without attachment | 1235 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EX — Patch planers
EX 20
KEMROC EX 20 — Patch planers. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM20 |
| Cutting depth, adjustable (A) | 0 – 70 mm |
| Cutting force at 350 bar | 4 KN |
| Cutting wheel diameter (C) | 360 mm |
| Cutting width (B) | 200 mm |
| Max. oil flow | 50 l/min |
| Max. operating pressure | 310 bar |
| Number of picks | 42 Pcs |
| Pick box | PH 14 Type |
| Rated power | 22 kW |
| Recommended excavator weight | 1 – 3 t |
| Recommended oil flow at 100 bar | 40 l/min |
| Recommended rpm | 160 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/28/26/14 H |
| Torque at 350 bar | 800 Nm |
| Total weight | 165 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EX 20 HD
KEMROC EX 20 HD — Patch planers. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM20 |
| Cutting depth, adjustable (A) | 0 – 70 mm |
| Cutting force at 350 bar | 6 KN |
| Cutting wheel diameter (C) | 360 mm |
| Cutting width (B) | 200 mm |
| Max. oil flow | 65 l/min |
| Max. operating pressure | 310 bar |
| Number of picks | 42 Pcs |
| Pick box | PH 14 Type |
| Rated power | 22 kW |
| Recommended excavator weight | 2 – 4 t |
| Recommended oil flow at 100 bar | 50 l/min |
| Recommended rpm | 160 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/28/26/14 H |
| Torque at 350 bar | 1000 Nm |
| Total weight | 182 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EX 30 HD
KEMROC EX 30 HD — Patch planers. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutting depth, adjustable (A) | 0 – 120 mm |
| Cutting force at 350 bar | 15 KN |
| Cutting wheel diameter (C) | 525 mm |
| Cutting width (B) | 300 mm |
| Max. oil flow | 105 l/min |
| Max. operating pressure | 380 bar |
| Number of picks | 35 Pcs |
| Pick box | PH 20 Type |
| Rated power | 30 kW |
| Recommended excavator weight | 5 – 10 t |
| Recommended oil flow at 100 bar | 80 l/min |
| Recommended rpm | 110 rpm |
| Standard hole pattern | LB10 |
| Standard pick | 16/48/32/20 H |
| Torque at 350 bar | 4100 Nm |
| Total weight | 420 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EX 45 HD
KEMROC EX 45 HD — Patch planers. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutting depth, adjustable (A) | 0 – 150 mm |
| Cutting force at 350 bar | 30 KN |
| Cutting wheel diameter (C) | 580 mm |
| Cutting width (B) | 450 mm |
| Max. oil flow | 180 l/min |
| Max. operating pressure | 380 bar |
| Number of picks | 49 Pcs |
| Pick box | PH 20 Type |
| Rated power | 65 kW |
| Recommended excavator weight | 10 – 16 t |
| Recommended oil flow at 100 bar | 155 l/min |
| Recommended rpm | 100 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 16/48/32/20 H |
| Torque at 350 bar | 8700 Nm |
| Total weight | 730 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EX 60 HD
KEMROC EX 60 HD — Patch planers. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutting depth, adjustable (A) | 0 – 190 mm |
| Cutting force at 350 bar | 28 KN |
| Cutting wheel diameter (C) | 675 mm |
| Cutting width (B) | 600 mm |
| Max. oil flow | 200 l/min |
| Max. operating pressure | 380 bar |
| Number of picks | 69 Pcs |
| Pick box | PH 20 Type |
| Rated power | 80 kW |
| Recommended excavator weight | 15 – 23 t |
| Recommended oil flow at 100 bar | 175 l/min |
| Recommended rpm | 105 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 19/48/36/20 H |
| Torque at 350 bar | 9300 Nm |
| Total weight | 1230 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EX 70 HD
KEMROC EX 70 HD — Patch planers. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutting depth, adjustable (A) | 0 – 190 mm |
| Cutting force at 350 bar | 53 KN |
| Cutting wheel diameter (C) | 675 mm |
| Cutting width (B) | 600 mm |
| Max. oil flow | 280 l/min |
| Max. operating pressure | 380 bar |
| Number of picks | 69 Pcs |
| Pick box | PH 20 Type |
| Rated power | 80 kW |
| Recommended excavator weight | 18 – 25 t |
| Recommended oil flow at 100 bar | 250 l/min |
| Recommended rpm | 80 rpm |
| Standard hole pattern | LB20 |
| Standard pick | 19/48/36/20 H |
| Torque at 350 bar | 17900 Nm |
| Total weight | 1230 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES — Cutter heads
ES 20
KEMROC ES 20 — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM20 |
| Cutting depth | 85 mm |
| Cutting force at 380 bar | 4 kN |
| Cutting wheel diameter (C) | 360 mm |
| Cutting width (B) | 200 mm |
| Max. oil flow | 70 l/min |
| Max. operating pressure | 310 bar |
| Min. oil flow | 20 l/min |
| Min. rpm | 85 U/min |
| Number of picks | 42 Pcs |
| Pick box | PH 14 Type |
| Rated power | 22 kW |
| Recommended excavator weight | 1 – 3 t |
| Standard hole pattern | LB10 |
| Standard pick | 16/28/26/14 H |
| Torque at 380 bar | 800 Nm |
| Weigth of base drive | 80 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 20 HD
KEMROC ES 20 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM20 |
| Cutting depth | 85 mm |
| Cutting force at 380 bar | 6 kN |
| Cutting wheel diameter (C) | 360 mm |
| Cutting width (B) | 200 mm |
| Max. oil flow | 90 l/min |
| Max. operating pressure | 310 bar |
| Min. oil flow | 25 l/min |
| Min. rpm | 85 U/min |
| Number of picks | 42 Pcs |
| Pick box | PH 14 Type |
| Rated power | 22 kW |
| Recommended excavator weight | 2 – 4 t |
| Standard hole pattern | LB10 |
| Standard pick | 16/28/26/14 H |
| Torque at 380 bar | 1000 Nm |
| Weigth of base drive | 80 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 30 HD
KEMROC ES 30 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutting depth | 110 mm |
| Cutting force at 380 bar | 17 kN |
| Cutting wheel diameter (C) | 520 mm |
| Cutting width (B) | 300 mm |
| Max. oil flow | 110 l/min |
| Max. operating pressure | 400 bar |
| Min. oil flow | 60 l/min |
| Min. rpm | 80 U/min |
| Number of picks | 35 Pcs |
| Pick box | PH 20 Type |
| Rated power | 30 kW |
| Recommended excavator weight | 5 – 10 t |
| Standard hole pattern | LB10 |
| Standard pick | 16/48/32/20 H |
| Torque at 380 bar | 4400 Nm |
| Weigth of base drive | 125 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 45 HD
KEMROC ES 45 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM40 |
| Cutting depth | 110 mm |
| Cutting force at 380 bar | 33 kN |
| Cutting wheel diameter (C) | 580 mm |
| Cutting width (B) | 450 mm |
| Max. oil flow | 180 l/min |
| Max. operating pressure | 400 bar |
| Min. oil flow | 100 l/min |
| Min. rpm | 65 U/min |
| Number of picks | 49 Pcs |
| Pick box | PH 20 Type |
| Rated power | 65 kW |
| Recommended excavator weight | 10 – 16 t |
| Standard hole pattern | LB20 |
| Standard pick | 16/48/32/20 H |
| Torque at 380 bar | 9400 Nm |
| Weigth of base drive | 270 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 60 HD
KEMROC ES 60 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutting depth | 190 mm |
| Cutting force at 380 bar | 30 kN |
| Cutting wheel diameter (C) | 670 mm |
| Cutting width (B) | 600 mm |
| Max. oil flow | 210 l/min |
| Max. operating pressure | 400 bar |
| Min. oil flow | 150 l/min |
| Min. rpm | 90 U/min |
| Number of picks | 69 Pcs |
| Pick box | PH 20 Type |
| Rated power | 80 kW |
| Recommended excavator weight | 15 – 23 t |
| Standard hole pattern | LB20 |
| Standard pick | 16/48/32/20 H |
| Torque at 380 bar | 10100 Nm |
| Weigth of base drive | 280 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 70 HD
KEMROC ES 70 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutting depth | 190 mm |
| Cutting force at 380 bar | 58 kN |
| Cutting wheel diameter (C) | 670 mm |
| Cutting width (B) | 600 mm |
| Max. oil flow | 210 l/min |
| Max. operating pressure | 400 bar |
| Min. oil flow | 180 l/min |
| Min. rpm | 55 U/min |
| Number of picks | 69 Pcs |
| Pick box | PH 20 Type |
| Rated power | 80 kW |
| Recommended excavator weight | 20 – 25 t |
| Standard hole pattern | LB20 |
| Standard pick | 16/48/32/20 H |
| Torque at 380 bar | 19500 Nm |
| Weigth of base drive | 280 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 80 HD
KEMROC ES 80 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutting depth | 150 mm |
| Cutting force at 380 bar | 37 kN |
| Cutting wheel diameter (C) | 825 mm |
| Cutting width (B) | 600 | 800 mm |
| Max. oil flow | 210 l/min |
| Max. operating pressure | 400 bar |
| Min. oil flow | 150 l/min |
| Min. rpm | 60 U/min |
| Number of picks | 50 | 69 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 80 kW |
| Recommended excavator weight | 15 – 25 t |
| Standard hole pattern | LB30 |
| Standard pick | 17/75/70/30 HQ |
| Torque at 380 bar | 15200 Nm |
| Weigth of base drive | 580 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 90 HD
KEMROC ES 90 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutting depth | 150 mm |
| Cutting force at 380 bar | 47 kN |
| Cutting wheel diameter (C) | 825 mm |
| Cutting width (B) | 600 | 800 mm |
| Max. oil flow | 210 l/min |
| Max. operating pressure | 400 bar |
| Min. oil flow | 180 l/min |
| Min. rpm | 55 U/min |
| Number of picks | 50 | 69 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 80 kW |
| Recommended excavator weight | 20 – 30 t |
| Standard hole pattern | LB40 |
| Standard pick | 17/75/70/30 HQ |
| Torque at 380 bar | 19500 Nm |
| Weigth of base drive | 580 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 110 HD
KEMROC ES 110 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutting depth | 105 | 150 mm |
| Cutting force at 380 bar | 69 kN |
| Cutting wheel diameter (C) | 785 mm |
| Cutting width (B) | 600 | 800 | 1000 mm |
| Max. oil flow | 350 l/min |
| Max. operating pressure | 400 bar |
| Min. oil flow | 210 l/min |
| Min. rpm | 45 U/min |
| Number of picks | 46 | 53 | 62 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 110 kW |
| Recommended excavator weight | 25 – 40 t |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 HQ |
| Torque at 380 bar | 27200 Nm |
| Weigth of base drive | 1115 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
ES 120 HD
KEMROC ES 120 HD — Cutter heads. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutting depth | 105 | 150 mm |
| Cutting force at 380 bar | 83 kN |
| Cutting wheel diameter (C) | 785 mm |
| Cutting width (B) | 600 | 800 | 1000 mm |
| Max. oil flow | 350 l/min |
| Max. operating pressure | 380 bar |
| Min. oil flow | 230 l/min |
| Min. rpm | 45 U/min |
| Number of picks | 46 | 53 | 62 Pcs |
| Pick box | PH 32 HD Type |
| Rated power | 120 kW |
| Recommended excavator weight | 25 – 40 t |
| Standard hole pattern | LB40 |
| Standard pick | 19/75/70/30 HQ |
| Torque at 380 bar | 32600 Nm |
| Weigth of base drive | 1115 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KSI — Soil mixing attachments
KSI 7000
KEMROC KSI 7000 — Soil mixing attachments. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Carrier type | Excavator Typ |
| Cutting force at 380 bar | 87 kN |
| Housing width (C) | 1000 mm |
| Max. ground compressive strength | 10 MPa |
| Max. oil flow | 410 l/min |
| Max. operating pressure | 400 bar |
| Mixing depth (A) | 4 | 5 | 6 | 7 m |
| Mixing width (B) | 350 – 500 mm |
| Rated power | 130 kW |
| Recommended chain speed | 2,0 – 2,5 m/s |
| Recommended excavator weight | 35 – 55 t |
| Recommended oil flow | 280 – 350 l/min |
| Recommended rig weight | – t |
| Standard hole pattern | LB30 |
| Standard pick | DT 22/46/38/22 |
| Torque at 380 bar | 24200 Nm |
| Weight (per extension) | 400 (1m) kg |
| Weight at max. depth & max. width | 4900 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KSI 12000
KEMROC KSI 12000 — Soil mixing attachments. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Carrier type | Excavator / Rig Typ |
| Cutting force at 380 bar | 156 kN |
| Housing width (C) | 1360 mm |
| Max. ground compressive strength | 10 MPa |
| Max. oil flow | 740 l/min |
| Max. operating pressure | 400 bar |
| Mixing depth (A) | 6 | 7 | 8 | 9 | 10 | 11 | 12 m |
| Mixing width (B) | 500 – 650 mm |
| Rated power | 220 kW |
| Recommended chain speed | 2,0 – 2,5 m/s |
| Recommended excavator weight | 80 – 120 t |
| Recommended oil flow at 150 bar | 490 – 620 l/min |
| Recommended rig weight | 50 – 70 t |
| Standard pick | DT 22/90/70/30 |
| Torque at 380 bar | 54400 Nm |
| Weight (per extension) | 800 kg |
| Weight at max. depth & max. width | 13500 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KSI 16000
KEMROC KSI 16000 — Soil mixing attachments. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Carrier type | Excavator / Rig Typ |
| Cutting force at 380 bar | 208 kN |
| Housing width (C) | 1630 mm |
| Max. ground compressive strength | 10 MPa |
| Max. oil flow | 980 l/min |
| Max. operating pressure | 400 bar |
| Mixing depth (A) | 6 | 8 | 10 | 12 | 14 | 16 m |
| Mixing width (B) | 450 – 950 mm |
| Rated power | 300 kW |
| Recommended chain speed | 2,0 – 2,5 m/s |
| Recommended excavator weight | 120 – 200 t |
| Recommended oil flow at 150 bar | 660 – 820 l/min |
| Recommended rig weight | 60 – 100 t |
| Standard pick | DT 22/90/70/30 |
| Torque at 380 bar | 72600 Nm |
| Weight (per extension) | 1900 (2m) kg |
| Weight at max. depth & max. width | 21000 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EBA — Auger drives
EBA 500
KEMROC EBA 500 — Auger drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter length (A) | 390 mm |
| Cutting force at 380 bar | 52.0 kN |
| Cutting width (B) | 645 mm |
| Max. drill diameter | 800 mm |
| Max. drilling depth at max. drill diameter | 2000 mm |
| Max. drilling depth at min. drill diameter | 5000 mm |
| Max. oil flow | 85 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Min. drill diameter | 200 mm |
| Output drive connection | H 80 Type |
| Pick box | PH 22 Type |
| Rated power | 41 kW |
| Recommended excavator weight | 7 – 13 t |
| Recommended oil flow | 50 – 70 l/min |
| Recommended rpm | 75 rpm |
| Standard pick | 22/46/38/22 H |
| Torque at 380 bar | 5200 Nm |
| Weight | 160 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EBA 750
KEMROC EBA 750 — Auger drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter length (A) | 390 mm |
| Cutting force at 380 bar | 73.4 kN |
| Cutting width (B) | 645 mm |
| Max. drill diameter | 800 mm |
| Max. drilling depth at max. drill diameter | 2000 mm |
| Max. drilling depth at min. drill diameter | 5000 mm |
| Max. oil flow | 85 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Min. drill diameter | 200 mm |
| Output drive connection | H 80 Type |
| Pick box | PH 22 Type |
| Rated power | 41 kW |
| Recommended excavator weight | 7 – 15 t |
| Recommended oil flow | 60 – 80 l/min |
| Recommended rpm | 65 rpm |
| Standard pick | 22/46/38/22 H |
| Torque at 380 bar | 7300 Nm |
| Weight | 160 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EBA 1000
KEMROC EBA 1000 — Auger drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter length (A) | 390 mm |
| Cutting force at 380 bar | 112.9 kN |
| Cutting width (B) | 645 mm |
| Max. drill diameter | 1000 mm |
| Max. drilling depth at max. drill diameter | 3000 mm |
| Max. drilling depth at min. drill diameter | 5000 mm |
| Max. oil flow | 150 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Min. drill diameter | 200 mm |
| Output drive connection | H 80 Type |
| Pick box | PH 22 Type |
| Rated power | 65 kW |
| Recommended excavator weight | 14 – 17 t |
| Recommended oil flow | 80 – 120 l/min |
| Recommended rpm | 65 rpm |
| Standard pick | 22/46/38/22 H |
| Torque at 380 bar | 11300 Nm |
| Weight | 180 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EBA 1500
KEMROC EBA 1500 — Auger drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter length (A) | 390 mm |
| Cutting force at 380 bar | 146.8 kN |
| Cutting width (B) | 645 mm |
| Max. drill diameter | 1000 mm |
| Max. drilling depth at max. drill diameter | 3000 mm |
| Max. drilling depth at min. drill diameter | 5000 mm |
| Max. oil flow | 150 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Min. drill diameter | 200 mm |
| Output drive connection | H 80 Type |
| Pick box | PH 22 Type |
| Rated power | 65 kW |
| Recommended excavator weight | 16 – 20 t |
| Recommended oil flow | 100 – 150 l/min |
| Recommended rpm | 60 rpm |
| Standard pick | 22/46/38/22 H |
| Torque at 380 bar | 14700 Nm |
| Weight | 180 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EBA 2300
KEMROC EBA 2300 — Auger drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter length (A) | 500 mm |
| Cutting force at 380 bar | 181.3 kN |
| Cutting width (B) | 990 mm |
| Max. drill diameter | 1200 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 8000 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Min. drill diameter | 200 mm |
| Output drive connection | H 80 Type |
| Pick box | PH 22 Type |
| Rated power | 110 kW |
| Recommended excavator weight | 18 – 35 t |
| Recommended oil flow | 150 – 320 l/min |
| Recommended rpm | 70 rpm |
| Standard pick | 22/46/38/22 H |
| Torque at 380 bar | 27200 Nm |
| Weight | 360 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EBA 2800
KEMROC EBA 2800 — Auger drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter length (A) | 500 mm |
| Cutting force at 380 bar | 201.8 kN |
| Cutting width (B) | 990 mm |
| Max. drill diameter | 1500 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 8000 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Min. drill diameter | 200 mm |
| Output drive connection | H 80 Type |
| Pick box | PH 22 Type |
| Rated power | 150 kW |
| Recommended excavator weight | 20 – 40 t |
| Recommended oil flow | 180 – 330 l/min |
| Recommended rpm | 65 rpm |
| Standard pick | 22/46/38/22 H |
| Torque at 380 bar | 30300 Nm |
| Weight | 360 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
EBA 3300
KEMROC EBA 3300 — Auger drives. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Cutter length (A) | 500 mm |
| Cutting force at 380 bar | 226.5 kN |
| Cutting width (B) | 990 mm |
| Max. drill diameter | 1500 mm |
| Max. drilling depth at max. drill diameter | 4000 mm |
| Max. drilling depth at min. drill diameter | 8000 mm |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Min. drill diameter | 300 mm |
| Output drive connection | H 80 Type |
| Pick box | PH 22 Type |
| Rated power | 160 kW |
| Recommended excavator weight | 25 – 40 t |
| Recommended oil flow | 220 – 340 l/min |
| Recommended rpm | 60 rpm |
| Standard pick | 22/46/38/22 H |
| Torque at 380 bar | 34000 Nm |
| Weight | 360 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KTR — Trenching attachments
KTR 65
KEMROC KTR 65 — Trenching attachments. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM50 |
| Cutting Depth (B) | 1000 – 1800 mm |
| Cutting Width (A) | 170 – 350 mm |
| Cutting force at 380 bar | 48 kN |
| Max. oil flow | 230 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 50 MPa |
| Pick box | PH 22 Type |
| Rated power | 65 kW |
| Recommended chain slack | 130 mm |
| Recommended chain speed | 2,0-2,5 m/s |
| Recommended excavator weight | 18 – 25 t |
| Recommended oil flow at 150 bar | 190 l/min |
| Standard hole pattern | LB30 |
| Standard pick | 12/45/38/22 HC |
| Torque at 380 bar | 12100 Nm |
| Weight at max. depth & max. width | 1700 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KTR 120
KEMROC KTR 120 — Trenching attachments. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutting Depth (B) | 1000 – 1800 mm |
| Cutting Width (A) | 200 – 450 mm |
| Cutting force at 380 bar | 94 kN |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 60 MPa |
| Pick box | PH 22 Type |
| Rated power | 120 kW |
| Recommended chain slack | 180 mm |
| Recommended chain speed | 2,0 – 2,5 m/s |
| Recommended excavator weight | 25 – 35 t |
| Recommended oil flow at 150 bar | 300 l/min |
| Standard hole pattern | LB30 |
| Standard pick | 12/45/38/22 HC |
| Torque at 380 bar | 27200 Nm |
| Weight at max. depth & max. width | 2700 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KTR 130
KEMROC KTR 130 — Trenching attachments. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM60 |
| Cutting Depth (B) | 1000 – 2000 mm |
| Cutting Width (A) | 200 – 450 mm |
| Cutting force at 380 bar | 81 kN |
| Max. oil flow | 360 l/min |
| Max. operating pressure | 400 bar |
| Max. rock compressive strength | 60 MPa |
| Pick box | PH 22 Type |
| Rated power | 130 kW |
| Recommended chain slack | 180 mm |
| Recommended chain speed | 2,0 – 2,5 m/s |
| Recommended excavator weight | 25 – 35 t |
| Recommended oil flow at 150 bar | 300 l/min |
| Standard hole pattern | LB30 |
| Standard pick | 12/45/38/22 HC |
| Torque at 380 bar | 22400 Nm |
| Weight at max. depth & max. width | 3000 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KDS — Diamond saws
KDS 20
KEMROC KDS 20 — Diamond saws. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM20 |
| Cutting wheel diameter (C) | 600 | 1000 mm |
| Max. Cutting depth (A) | 400 mm |
| Max. Cutting wheel diameter (C) | 1000 mm |
| Max. Rated power | 23 KW |
| Max. operating pressure | 350 bar |
| Max. rpm | 1100 rpm |
| Recommended excavator weight | 2 – 4 t |
| Recommended oil flow | 25 – 35 l/min |
| Recommended rpm | 730 – 1000 rpm |
| Standard hole pattern | LB10 |
| Torque at 350 bar | 200 Nm |
| Total weight | 192 | 207 kg |
| Weight of cutting wheel | 30 kg |
| Weight of drive unit, approx. | 105 kg |
| Weight of protective cover | 57 | 72 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KDS 30
KEMROC KDS 30 — Diamond saws. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutting wheel diameter (C) | 700 | 1400 mm |
| Max. Cutting depth (A) | 550 mm |
| Max. Cutting wheel diameter (C) | 1400 mm |
| Max. Rated power | 38 KW |
| Max. operating pressure | 350 bar |
| Max. rpm | 1100 rpm |
| Recommended excavator weight | 5-10 t |
| Recommended oil flow | 30 – 55 l/min |
| Recommended rpm | 550 – 1000 rpm |
| Standard hole pattern | LB10 |
| Torque at 350 bar | 300 Nm |
| Total weight | 390 | 445 kg |
| Weight of cutting wheel | 60 kg |
| Weight of drive unit, approx. | 250 kg |
| Weight of protective cover | 80 | 135 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KDS 40
KEMROC KDS 40 — Diamond saws. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutting wheel diameter (C) | 800 | 1600 mm |
| Max. Cutting depth (A) | 630 mm |
| Max. Cutting wheel diameter (C) | 1600 mm |
| Max. Rated power | 70 KW |
| Max. operating pressure | 350 bar |
| Max. rpm | 1100 rpm |
| Recommended excavator weight | 10 – 16 t |
| Recommended oil flow | 50 – 120 l/min |
| Recommended rpm | 480 – 1100 rpm |
| Standard hole pattern | LB20 |
| Torque at 350 bar | 600 Nm |
| Total weight | 490 | 565 kg |
| Weight of cutting wheel | 70 kg |
| Weight of drive unit, approx. | 340 kg |
| Weight of protective cover | 80 |155 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KDS 50
KEMROC KDS 50 — Diamond saws. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM30 |
| Cutting wheel diameter (C) | 800 | 2000 mm |
| Max. Cutting depth (A) | 705 mm |
| Max. Cutting wheel diameter (C) | 1800 mm |
| Max. Rated power | 85 KW |
| Max. operating pressure | 350 bar |
| Max. rpm | 1100 rpm |
| Recommended excavator weight | 15 – 25 t |
| Recommended oil flow | 55 – 130 l/min |
| Recommended rpm | 420 – 1000 rpm |
| Standard hole pattern | LB20 |
| Torque at 350 bar | 700 Nm |
| Total weight | 610 | 710 kg |
| Weight of cutting wheel | 100 kg |
| Weight of drive unit, approx. | 420 kg |
| Weight of protective cover | 90 |190 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KDS 50 HD
KEMROC KDS 50 HD — Diamond saws. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Compatible rotation unit (KRM) | KRM35 |
| Cutting wheel diameter (C) | 800 | 2000 mm |
| Max. Cutting depth (A) | 805 mm |
| Max. Cutting wheel diameter (C) | 2000 mm |
| Max. Rated power | 181 KW |
| Max. operating pressure | 350 bar |
| Max. rpm | 1100 rpm |
| Recommended excavator weight | 18 – 30 t |
| Recommended oil flow | 110 – 280 l/min |
| Recommended rpm | 390 – 1000 rpm |
| Standard hole pattern | LB20 |
| Torque at 350 bar | 1600 Nm |
| Total weight | 670 | 800 kg |
| Weight of cutting wheel | 130 kg |
| Weight of drive unit, approx. | 450 kg |
| Weight of protective cover | 90 | 220 kg |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRM — Rotation units
KRM 20
KEMROC KRM 20 — Rotation units. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Diameter (A) | 240 mm |
| Height (B) | 330 mm |
| Length (C) | 350 mm |
| Max. holding torque | 6000 Nm |
| Max. idle oil flow | 40 l/min |
| Max. operating pressure | 160 bar |
| Number of drive motors | 1 Pcs |
| Recommended excavator weight | 2 – 6 t |
| Recommended idle rpm | 9 rpm |
| Weight | 138 kg |
| Width (D) | 510 mm |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRM 30
KEMROC KRM 30 — Rotation units. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Diameter (A) | 370 mm |
| Height (B) | 371 mm |
| Length (C) | 500 mm |
| Max. holding torque | 9000 Nm |
| Max. idle oil flow | 40 l/min |
| Max. operating pressure | 160 bar |
| Number of drive motors | 1 Pcs |
| Recommended excavator weight | 5 – 12 t |
| Recommended idle rpm | 7 rpm |
| Weight | 335 kg |
| Width (D) | 610 mm |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRM 35
KEMROC KRM 35 — Rotation units. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Diameter (A) | 370 mm |
| Height (B) | 371 mm |
| Length (C) | 500 mm |
| Max. holding torque | 18000 Nm |
| Max. idle oil flow | 40 l/min |
| Max. operating pressure | 160 bar |
| Number of drive motors | 2 Pcs |
| Recommended excavator weight | 7 – 15 t |
| Recommended idle rpm | 5 rpm |
| Weight | 387 kg |
| Width (D) | 610 mm |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRM 40
KEMROC KRM 40 — Rotation units. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Diameter (A) | 460 mm |
| Height (B) | 405 mm |
| Length (C) | 555 mm |
| Max. holding torque | 45000 Nm |
| Max. idle oil flow | 40 l/min |
| Max. operating pressure | 160 bar |
| Number of drive motors | 2 Pcs |
| Recommended excavator weight | 12 – 18 t |
| Recommended idle rpm | 3 rpm |
| Weight | 493 kg |
| Width (D) | 805 mm |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRM 50
KEMROC KRM 50 — Rotation units. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Diameter (A) | 570 mm |
| Height (B) | 430 mm |
| Length (C) | 690 mm |
| Max. holding torque | 95000 Nm |
| Max. idle oil flow | 40 l/min |
| Max. operating pressure | 160 bar |
| Number of drive motors | 2 Pcs |
| Recommended excavator weight | 19 – 27 t |
| Recommended idle rpm | 1 rpm |
| Weight | 629 kg |
| Width (D) | 860 mm |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRM 60
KEMROC KRM 60 — Rotation units. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Diameter (A) | 600 mm |
| Height (B) | 610 mm |
| Length (C) | 780 mm |
| Max. holding torque | 200000 Nm |
| Max. idle oil flow | 40 l/min |
| Max. operating pressure | 160 bar |
| Number of drive motors | 2 Pcs |
| Recommended excavator weight | 25 – 40 t |
| Recommended idle rpm | 1 rpm |
| Weight | 910 kg |
| Width (D) | 770 mm |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRM 70
KEMROC KRM 70 — Rotation units. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Diameter (A) | 700 mm |
| Height (B) | 620 mm |
| Length (C) | 910 mm |
| Max. holding torque | 270000 Nm |
| Max. idle oil flow | 40 l/min |
| Max. operating pressure | 160 bar |
| Number of drive motors | 2 Pcs |
| Recommended excavator weight | 30 – 50 t |
| Recommended idle rpm | 1 rpm |
| Weight | 1028 kg |
| Width (D) | 870 mm |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
KRM 80
KEMROC KRM 80 — Rotation units. Request a project-specific equipment review and quote from Supply Haus.
Manufacturer specifications
Metric values transcribed from the manufacturer family listing on October 28, 2026. Final configuration and U.S. availability require confirmation.
| Specification | Published value |
|---|---|
| Diameter (A) | 900 mm |
| Height (B) | 820 mm |
| Length (C) | 1170 mm |
| Max. holding torque | 350000 Nm |
| Max. idle oil flow | 40 l/min |
| Max. operating pressure | 160 bar |
| Number of drive motors | 2 Pcs |
| Recommended excavator weight | 50 – 70 t |
| Recommended idle rpm | 1 rpm |
| Weight | 2068 kg |
| Width (D) | 1000 mm |
Carrier weight alone does not confirm compatibility. Verify hydraulic flow, pressure, mounting, carrier stability, material conditions and application with the technical team.
04 / KNOW YOUR NUMBERS
EVERY EXTRA
INCH ADDS UP.
A wider trench means more material to excavate. Adjust the dimensions to compare two trench profiles.
Geometry illustration only. It does not predict production, cost savings or attachment performance.LESS EXCAVATION VOLUME74.1 yd³
Length × depth × width ÷ 27. Widths converted to feet.05 / THE CONTRACTOR CONCIERGE
BIG IRON.
PERSONAL CONVERSATION.
CHECK THE MACHINE.
Carrier, mounting and hydraulic details help establish the questions for technical review.
BUILD THE REQUEST.
Submit your job details to Supply Haus for pricing, availability, configuration or a demonstration discussion.
GOOD QUESTIONS.
STRAIGHT ANSWERS.
Can I choose by excavator weight alone?+
No. Weight is a starting point. Hydraulic flow and pressure, mounting, stability, material and application all require review before a final model is selected.
Where are the prices and availability?+
These attachments need a project-specific quote. Ask Allen to confirm the configuration, U.S. availability, freight and lead time for your job.
What should I include in a request?+
Your carrier make and model, material, location, dimensions and timing. Add hydraulic flow and pressure if known, plus any reinforcement or access constraints.
Does this form send my request automatically?+
Yes. Submit this form to send your request through the Supply Haus contact system. A confirmation appears after Shopify accepts it.
CONTRACTOR CONCIERGE