Framing Solution Center
Calculate lumber, sheathing, openings, fasteners, and waste before material reaches the jobsite.
Framing Calculator Command Center™
Use practical framing estimators to establish the preliminary requirement, add the right allowance, and send the complete takeoff to a real human.
Project Orientation
Wall Framing
Estimate studs, plates, and blocking for repeated wall runs.
Doors & Windows
Estimate common opening-related framing members without attempting to size a structural header.
Header size, bearing, jack-stud count, and connection requirements must be verified against the approved plans and applicable code.
Floor Systems
Estimate joists, rim board, subfloor, adhesive, and fasteners by floor area.
Joist direction is assumed across the entered floor length. Member depth, species, grade, span, and load are outside this estimator.
Roof Framing
Calculate approximate roof area, member count, sheathing, underlayment, and fasteners.
This calculator estimates quantity only. It does not size rafters, trusses, beams, bracing, or structural connections.
Sheathing & Fasteners
Estimate sheets, fasteners, adhesive, and seam treatment for walls, roofs, floors, and interior panels.
Fastener spacing is an estimating input—not a fastening schedule. Verify panel, fastener, wind, seismic, and project requirements.
Working Material List
Framing Workflow Intelligence™
Choose the stage. Supply Haus will organize the products, equipment, documentation, and human support around the work in front of you.
Stage 01 — Plan & Estimate
Review the work, establish assumptions, and build the preliminary takeoff before material reaches the site.
Recommended System
Approved plans, applicable code, and manufacturer requirements govern final structural selection.
Stage 02 — Foundation Interface
Establish the sill, anchors, moisture break, and layout that every framing stage will inherit.
Recommended System
Approved plans, applicable code, and manufacturer requirements govern final structural selection.
Stage 03 — Floor Systems
Assemble the floor system, close the deck, and connect the platform into one working structure.
Recommended System
Approved plans, applicable code, and manufacturer requirements govern final structural selection.
Stage 04 — Walls & Openings
Frame wall runs, coordinate openings, install blocking, and hold the assembly plumb.
Recommended System
Approved plans, applicable code, and manufacturer requirements govern final structural selection.
Stage 05 — Roof Systems
Assemble the roof frame, brace it correctly, and protect the crew working above the plate line.
Recommended System
Approved plans, applicable code, and manufacturer requirements govern final structural selection.
Stage 06 — Sheathing & Dry-In
Install the building skin, control water and air, and move the structure toward dry-in.
Recommended System
Approved plans, applicable code, and manufacturer requirements govern final structural selection.
Stage 07 — Connect & Inspect
Verify hardware, fastening, fire blocking, bracing, and documentation before the inspection window.
Recommended System
Approved plans, applicable code, and manufacturer requirements govern final structural selection.
Framing Concierge
Bring us the takeoff, the problem, or the plans. A Supply Haus framing human will help assemble the complete system.